UnitekFiber Solution.
UnitekFiber Solution.

MTP MPO Fiber Cable| Distribution MPO/MTP-LC Fiber Optic Patch Cord 12F OM3 PVC

MPO/MTP-MPO/MTP+6*LC fiber optic patch cord is a high-performance networking component, which is design for efficient connectivity in high density data centers and telecommunication environments. One end is 12f MPO/MTP connector, and the other end come with 1*MPO+6*LC connector. The MPO/MTP fiber cable is suitable for high-density data center, which can be transmit bandwidth-intensive applications. Providing a reliable and efficient solution for modern data center and cloud computing networks. The breakout design of the MPO fiber optic patch cord enables easy maintenance and scalability, while the small size optimizes rack space utilization and contributes to improved energy efficiency. Multi-mode (OM1/OM2/OM3/OM4/OM5) and single mode (G652D, G657A1, G657A2, etc.) are available to choose.

Products
Description
FAQ
Specification
Reviews
Video

Use and Application of Breakout MPO/MTP-MPO+6*LC Fiber Cable


As the demanding of bandwidth speeds pushed to 400G or more higher, the MPO/MTP connector optical patch cord became the importance part for higher speed switch-to-switch backbone data center applications. MPO fiber cable can be used in optical fiber communication systems, cable TV networks, telecommunications networks, local area networks, wide area networks, wiring in communication base stations, wiring in distribution boxes, and optical link interconnection in optical active equipment. In these applications, 12-fiber MPO/MTP OM3 fiber patch cord form the permanent backbone link, and then are transmitted at patch panels via either MPO to LC cassettes module or MPO to LC patch cords. The Breakout MPO/MTP-MPO/MTP+6*LC fiber patch cord reduce installation costs by minimizing waste, optimizing cable management, accelerating deployment, and increasing flexibility and manageability.


MTP MPO Fiber Cable| Distribution MPO/MTP-LC Fiber Optic Patch Cord 12F OM3 PVC


Several Outer Jacket Selection of MPO/MTP Fiber Jumper


The MPO/MTP fiber cable jacket is the outermost layer of a cable whose primary function is to protect the insulation and conductor core from external physical forces and chemical deterioration. Patch cord jackets offer mechanical, moisture, flame and chemical protection, while also protecting the cable from damage during or after installation. UnitekFiber provide LSZH, PVC, PVC-OFNR, PVC-OFNP outer jacket material to choose, which is enhance the multimode fiber patch lead physical characteristic, such as toughness, tear and abrasion, resistance resistance to cable deformation and fire-retardant. Providing an extend the product life cycle and maintain the stability of data transmission.


MTP MPO Fiber Cable| Distribution MPO/MTP-LC Fiber Optic Patch Cord 12F OM3 PVC


The polarity of MTP/MPO Fiber Optic Patch Cord


The polarity of MTP/MPO cable types refers to the difference between the optical transmitters and receivers at both ends of the fiber link. Due to the unique design of MTP/MPO connectors, the polarity issues must be addressed in high-density MTP/MPO cable systems. There are three types of MPO/MTP fiber cable polarity: Type A, Type B, and Type C. Make sure which type you need, it could help the data center’s equipment work better.


MTP MPO Fiber Cable| Distribution MPO/MTP-LC Fiber Optic Patch Cord 12F OM3 PVC

What is the speed of MPO cable?

MPO fiber cables are used for high-speed switch-to-switch backbone data center applications. Speeds range from 10 to 200 Gbps, with expected improvements up to 400 Gbps.

Is the MTP connector an MPO connector?

The MTP connectors are fully compliant with the MPO standards, compared to generic MPO connectors, the MPO connector could achieved higher performance levels.


What is the difference between Type A and Type B MPO cable?

Type A MPO adapters all have a key up on one side and the mating connector key down on the other side. Type B trunk cable uses key up connector on both ends. This type of array mating results in an inversion, which means the fiber positions are reversed at each end.


Male or female? what's difference between them?

MTP connectors can either be male or female, often referred to as the gender type of a connector. The male connector has pins, whereas the female connector has no pins. No pins need to be combined with pins to connect. So if you use adapters to connect two cables, they must be one male and one female.

What is the color of MPO cable mean?

Yellow jacket shows that cable has a Single-Mode, and Beige, Aqua, Pink, Green jacket shows that cable has a Multi-mode. Jacket Color Table shows most used equipment cable category and corresponding color.

Horace
May 08, 2024

This product do a well work on the data center, absolutely save the space, save the installation time and could be manage the cable better than before. Highly recommended.

Verified Purchase
Helpful 0
Charlotte
May 08, 2024

This distribution MPO/MTP fiber optic patch cord has greatly improved our network efficiency.

Verified Purchase
Helpful 0
Bonnie
May 08, 2024

Our data center was in dire need of a more efficient cabling solution, and the MPO/MTP fiber optic jumpers delivered exactly that.

Verified Purchase
Helpful 0
Cathy
May 08, 2024

Seems to be well constructed , works perfectly as expected.

Verified Purchase
Helpful 0
Cora
May 08, 2024

The MPO/MTP fiber optic patch cords have simplified our cable management and reduced the time required for installation and maintenance.

Verified Purchase
Helpful 0
Video
Contact UnitekFiber
Contact UnitekFiber
Other MTP/MPO Fiber Cable Products
Recent Post