24 electrical ports + 4 optical ports+8 combo ports switch is a high-performance industrial Ethernet switch, which can realizes multiple combinations through fast Ethernet interface and optical fiber interface that enhances the flexibility of designing networks and applications. This switch supports abundant layer 2 software features such as port mirroring, VLAN, QoS, stp/Rstp, and a series of practical management methods.
24 electrical ports, and 4 optical ports, built-in power
IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant
Support PoE IP cameras, PoE WIFI AP, and PoE IP phones
Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure
Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices
All ports support wire speed switching, jumbo frame transmission
Support upstream ports lightning protection
Dynamic power control to ensure stable output power (Enhanced)
Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)
Reliable short-circuit protection to ensure safety (Enhanced)
Over-voltage and under-voltage protection (Some other manufacturers' products don't support this
The industrial ethernet switch is applied in Security system, video multiplexers, IP or CCTV Video Applications, Fiber Optic Solutions and so on.
Product Description | 1000M 24xRJ45 ports,1000M 4xSFP ports Managed Industrial Ethernet Switch |
Network Protocols | IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX; IEEE802.3ab 1000Base-T; IEE802.3z 100Base-X; IEEE802.3x; IEEE802.3af; IEEE802.3at; |
RJ45 Interface | 10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Optic Fiber Interface | 1000BaseFX port (SC/FC/ST/SFP optional) |
Copper Cable | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
Optic Fiber Cable | MM：850nm 0～550M SM：1310nm 0～2KM, 1310nm 0～40KM,1550nm 0～120KM |
cyber security | Support user hierarchical management and password protection Support IEEE 802.1x authentication/centralized MAC address authentication Support RADIUS authentication Support protection port Support MAC filtering Support IP+MAC+ port binding |
Technical standard | IEEE standard: IEEE 802.3 for 10BaseT 802.3u 100BaseT(X) and 100BaseFX IEEE 802.3z for 1000BaseX IEEE 802.3ab for 1000BaseT(X) 802.3x flow control IEEE 802.1D Spanning Tree Protocol IEEE 802.1W Rapid Spanning Tree Protocol IEEE 802.1Q VLAN tagging IEEE 802.1P Quality of Service IEEE 802.1W RSTP (ring network) IEEE 802.3ad static load balancing configuration and LACP dynamic configuration Protocol: IGMP Snooping v1, v2, v3 equipment, GMRP, GVRP, SNMPv1, v2c, v3, DHCP Snooping, BootP, TFTP/Xmodem, SNTP, RMON, HTTP, Telnet, SSH, Syslog, Option 81/82, LLDP MIB: MIB-II (RFC1213), Bridge MIB (RFC1493), RSTP MIB, RMON MIB (RFC1724) Group 1, 2, 3, 9, OSPF MIB (RFC1850), SNMP v. 2 MIB (RFC 1907), IF MIB (RFC2233), RFC 2571, RFC 2572, RFC 2573, RFC 2574, RFC 2570, RFC 2674 Flow control: IEEE 802.3x flow control, back pressure flow control |
Switch properties | Application level: Layer 2 Total backplane bandwidth: 128Gbps MAC address table: 8K Packet buffer: 3Mbits VLAN data: 1~4094 |
Protection Level | IP40 |
LED indicator | Power indicator: PWR Interface indicator: electrical port, optical port (Link/ACT) |
Power Supply | Input voltage: DC36-72V (dual power supply redundant backup) Access terminal: Phoenix terminal Support dual power supply redundancy Support built-in overcurrent 4.0A protection Support reverse connection protection |
Working Environment | Working temperature: -40~85℃ ; Storage temperature: -40~85℃ Relative Humidity: 5%~95 %( no condensation) |
Industrial Standard | MI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge IEC(EN)61000-4-3(RS): 10V/m(80～1000MHz) IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz～150kHz), 10V(150kHz～80MHz) IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s IEC(EN)61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Mechanical properties | Shell: metal material Installation: DIN rail type, wall-mounted installation Weight: 5Kg Size: 440×240×44mm |
MTBF | 300,000 hours |
Warranty | 5 years |
