In the optical communication system, it is found that the optical loss doubles, and even the optical signal is cut off, and the network connection fails, etc.After investigation, it was found that a large number of invisible particles, dust, oil and other dirt were distributed on the end face of the optical fiber. Therefore, the cleaning of fiber end faces cannot be ignored or sloppy.
UnitekFiber's one-click fiber optic cleaner is a handheld device that is used to clean the end-face of a fiber optic connector. It is designed to remove dirt, oil, and other contaminants that may affect the performance of the fiber optic connector. The cleaner typically consists of a cleaning head and a cleaning cloth. The cleaning head is made of a soft material, such as microfiber, that is used to wipe the end-face of the connector. The cleaning cloth is pre-moistened with a cleaning solution or alcohol, which helps to dissolve and remove any contaminants on the end-face. To use the one-click fiber optic cleaner, you simply insert the cleaning head into the connector ferrule and press down on the button or lever to initiate the cleaning process. The cleaning head is then rotated several times, typically 180 degrees, to ensure that the entire end-face is cleaned. One of the advantages of a one-click fiber optic cleaner is that it is easy and convenient to use. It requires no external power source, and can be used in the field or in the lab. Additionally, it can be used multiple times before needing to replace the cleaning head. If you would like to learn more about fiber optic cleaners, please contact us via sales@unitekfiber.com for additional information.
