UnitekFiber Solution
Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP
Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP
Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP

Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP

Description


8 optical and 8 electrical managed industrial-grade switches are equipped with 8 Gigabit optical ports and 8 Gigabit electrical ports. It have powerful network management capabilities, complete security and QoS strategies.It can not only supports VLAN division, port Mirroring and port speed limit, also supports broadcast storm suppression and flow control.The Industrial Ehternet switch can be managed through WEB, CLI, SNMP multiple interfaces and methods.




  • Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP
  • Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP
  • Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP
  • Industrial-grade Ethernet Switch High Stability Managed Full Gigabit switch with 8 Ports RJ45 and 8 Ports SFP

Features

  • 8 Gigabit optical ports, and 8 electrical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this


Application:

The industrial ethernet switch is applied in Security system, video multiplexers, IP or CCTV Video Applications, Fiber Optic Solutions and so on.

 

Connection Diagram:

333.png



Specifications:

Product Description

1000M 8 x RJ45 ports,1000M 8 x SFP ports Industrial Ethernet Switch

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEE802.3z 100Base-X; IEEE802.3x; IEEE802.3af;

IEEE802.3at;

RJ45 Interface

10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

1000BaseFX port (SC/FC/ST/SFP optional)

Capacity forwarding rate

Capacity per million packets per second (MPPS) (64-byte packets): 47.6

Gigabit per second (Gbps) switching capacity: 256

Spanning Tree Association (STP)

Standard spanning tree 802.1d

Rapid Spanning Tree (RSTP) 802.1w

Switch properties

Application level: Layer 2

Total backplane bandwidth: 149.76Gbps

MAC address table: 16K

Packet buffer: 8Mbits

Exchange delay:<5us

VLAN data: 1~4094

Exchange method: store-forward

Protection Level

IP40 

Power Supply

Input voltage: DC24V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail type, wall-mounted installation

Weight: 1.1Kg

Size: 165*145*45mmmm

MTBF

300,000 hours

Warranty

5 years



Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News