UnitekFiber Solution
Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports
Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports
Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports

Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports

Description


The 4 optical 24 electrical Ethernet switch is an industrial-grade managed Ethernet switch. This produc supports 4 Gigabit SFP optical ports and 24 Gigabit electrical ports. The product complies with FCC, CE, EMS (anti-electromagnetic interference), EMI (electromagnetic interference) standards, supports -40°C ~85°C operating temperature and 4KV network port surge protection, and can adapts to harsh working environment.      






  • Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports
  • Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports
  • Hot Sale Full Gigabit Industrial Ethernet Switch 24-Port 10M 100M 1000Mbps 4 SFP Ports SFP 4 Combo Ports

Features

  • 4 optical ports, and 24 electrical  ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this


Application:

The industrial ethernet switch is applied in Security system, video multiplexers, IP or CCTV Video Applications, Fiber Optic Solutions and so on.

 

Connection Diagram:

333.png



Specifications:

Product Description

1000M 24xRJ45 ports,1000M 4xSFP ports Managed Industrial Ethernet Switch

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEE802.3z 100Base-X; IEEE802.3x;

RJ45 Interface

10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

1000BaseFX port (SC/FC/ST/SFP optional)

Copper Cable

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-TX: Cat6 or later UTP(≤100 meter)

Optic Fiber Cable

MM:850nm  0~550M

SM:1310nm  0~2KM, 1310nm  0~40KM,1550nm  0~120KM

Switch properties

Application level: Layer 3

Total backplane bandwidth: 449.2Gbps

MAC address table: 16K

Packet buffer: 8Mbits

VLAN data: 1~4094

Exchange delay:<5us

 

Exchange method: store-forward

 

Protection Level

IP40 

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: DC48-57V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail type, wall-mounted installation

Weight: 5Kg

Size:  440×285×44.5mm

MTBF

300,000 hours

Warranty

5 years

 

 



Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News
  • 25G Optical Transceiver Module Cabling
    The modern Internet industry is changing with each passing day, and the scale of global data centers continues to expand and upgrade. A large number of optical transceiver modules are required for int...
  • What is 144cores MPO Fiber Patch Panel?
    The high density 144 core MPO fiber patch panel is based on standard preterminated fiber patch cord, which can accommodate up to 12pcs of 12core MPO cassette module, which is providing high density f...
  • What is the Difference Between G657 and G652 Optical Fibers
    Nowadays, more and more people live in apartment buildings, dormitories and other multi-dwelling units (MDU), and with the increasing demand for high-bandwidth applications such as high-definition tel...