UnitekFiber Solution
Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network
Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network
Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network

Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network

Description

8 Gigabit electrical ports + 2 Gigabit optical ports Industrial Ethernet switches, supporting 8 10/100/1000m electrical ports and 2 1000m optical ports. It extends the limit of network transmission distance from 100 meters of twisted pair cable to more than 100 kilometers. The product complies with FCC and CE standards. It is a non-management model, which is plug and play, no configuration, and easy to use.

 

















                   

  • Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network
  • Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network
  • Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network
  • Industrial Ethernet PoE Switch with SFP and RJ45 Gigabit Switch Brands for Fiber Optical Network

Features

  • 2 Gigabit optical PoE ports, and 8 1000Mbps electrical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Power-on in order of the PoE port, effectively reduce current strike, and reduce the transient voltage surge to PoE switch and other connected devices at the startup (Unique)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this)

Technical Specifications:

 

Product Description

8 channel 1000M PoE electrical port + 2 channel 1000M FX optical port industrial-grade Ethernet POE switch

Interface

8xRJ45 ports, 2 fiber optic ports

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab1000Base-T;IEEE802.3z1000Base-X;IEEE802.3x;IEEE802.3af;

IEEE802.3at;

POE Standards

Standard PoE: IEEE802.3af/ IEEE802.3at

PoE interface:1 port suport PoE

Output power:

Maximum power15.4W (IEEE 802.3af)

Maximum power30W (IEEE 802.3at)

POE port automatic identify af/at

Output voltage: DC48~57V

Power supply mode: 1/2+;3/6-

RJ45 Interface

10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Fiber Interface

1000BaseFX port (SC/FC/ST /SFP optional)

Switch properties

Application level: Layer 2

Total backplane bandwidth: 15.2Gbps

Whole machine packet forwarding rate: 11.3088Mpps

MAC address table: 1K

Packet buffer: 512K

Exchange delay:<3µs

Exchange method: store-forward

Power consumption:<3W

Protection Level

IP40 

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: 48~57V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  

Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail type, wall-mounted installation

Weight: 0.36Kg

Size:118 x 86 x 39mm(length×width×height)

MTBF

300,000 hours

Warranty

5 years

 








 


 


Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News