UnitekFiber Solution
10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale
10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale
10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale

10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale

Description

The 1 optical 4 electrical 100M unmanaged industrial Ethernet switch is equipped with 4 100M electrical ports and 1 100M optical port. It is a Layer 2 industrial Ethernet switch that meets the requirements of industrial design. It adopts mature technology and open network standards to adapt to low temperatures.




                   

  • 10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale
  • 10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale
  • 10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale
  • 10/100Mbps Industrial Ethernet PoE Switch with 1 Optical Port 4 Electrical Ports Wholesale

Features

  • 1 optical PoE ports, and 4 electrical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Power-on in order of the PoE port, effectively reduce current strike, and reduce the transient voltage surge to PoE switch and other connected devices at the startup (Unique)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this)

Technical Specifications:

Product Name

10/100Mbps PoE Industrial Ethernet Switch With 1 Optical Port 4 Electrical Ports Wholesale

Product Model

100m 1 optical 4 electrical unmanaged industrial PoE switch

Product Description

4xRJ45 ports, 1x fiber optic ports

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;IEE802.3x; IEEE802.3af;  IEEE802.3at;

POE Standards

Standard PoE: IEEE802.3af/ IEEE802.3at


PoE port: 1-4 ports support PoE


Output Power:

Maximum power 15.4W (IEEE 802.3af)

Maximum power 30W (IEEE 802.3at)

POE port automatically recognizes af/at


Output voltage: DC48~57V


Power supply mode: 1/2+;3/6-

RJ45 Interface

10/100BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

100BaseFX port (SC/FC/ST optional)

Copper Cable

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-TX: Cat6 or later UTP(≤100 meter)

 

Optic Fiber Cable

MM:850nm  0~550M

SM:1310nm  0~2KM, 1310nm  0~40KM,1550nm  0~120KM

Switch properties

Application level: Layer 2

Total backplane bandwidth: 1.52Gbps

Whole machine packet forwarding rate: 1.130912Mpps

MAC address table: 1K

Packet buffer: 512K

Exchange delay:<3us

Exchange method: store-forward 

Power consumption:<3W

Protection Level

IP40

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: DC12~52V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail and wall-mounted installation

Weight: 0.85Kg

MTBF

300,000 hours

Warranty

5 years


 


Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News