UnitekFiber Solution
Industrial Ethernet Switch 24-port 10M 100M 1000M 4-ports SFP and 8 Combo Ports Steel Alloy
Industrial Ethernet Switch 24-port 10M 100M 1000M 4-ports SFP and 8 Combo Ports Steel Alloy
Industrial Ethernet Switch 24-port 10M 100M 1000M 4-ports SFP and 8 Combo Ports Steel Alloy

Industrial Ethernet Switch 24-port 10M 100M 1000M 4-ports SFP and 8 Combo Ports Steel Alloy

Description


24 electrical ports + 4 optical ports+8 combo ports switch is a high-performance industrial Ethernet switch, which can realizes multiple combinations through fast Ethernet interface and optical fiber interface that enhances the flexibility of designing networks and applications. This switch supports abundant layer 2 software features such as port mirroring, VLAN, QoS, stp/Rstp, and a series of practical management methods.



  • 7.jpg
  • 5.jpg
  • 4.jpg
  • 6.jpg
  • 3.jpg
  • 1.jpg

Features

  • 24 electrical ports, and 4 optical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this


Application:

The industrial ethernet switch is applied in Security system, video multiplexers, IP or CCTV Video Applications, Fiber Optic Solutions and so on.

 

Connection Diagram:

333.png



Specifications:

Product Description

1000M 24xRJ45 ports,1000M 4xSFP ports Managed Industrial Ethernet Switch

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEE802.3z 100Base-X; IEEE802.3x; IEEE802.3af;

IEEE802.3at;

RJ45 Interface

10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

1000BaseFX port (SC/FC/ST/SFP optional)

Copper Cable

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-TX: Cat6 or later UTP(≤100 meter)

Optic Fiber Cable

MM:850nm  0~550M

SM:1310nm  0~2KM, 1310nm  0~40KM,1550nm  0~120KM

cyber security

Support user hierarchical management and password protection

Support IEEE 802.1x authentication/centralized MAC address authentication

Support RADIUS authentication

Support protection port

Support MAC filtering

Support IP+MAC+ port binding

Technical standard

IEEE standard:

IEEE 802.3 for 10BaseT

802.3u 100BaseT(X) and 100BaseFX

IEEE 802.3z for 1000BaseX

IEEE 802.3ab for 1000BaseT(X)

802.3x flow control

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1W Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN tagging

IEEE 802.1P Quality of Service

IEEE 802.1W RSTP (ring network)

IEEE 802.3ad static load balancing configuration and LACP dynamic configuration

Protocol: IGMP Snooping v1, v2, v3 equipment, GMRP, GVRP, SNMPv1, v2c, v3, DHCP Snooping, BootP, TFTP/Xmodem,

SNTP, RMON, HTTP, Telnet, SSH, Syslog, Option 81/82, LLDP

MIB: MIB-II (RFC1213), Bridge MIB (RFC1493), RSTP MIB, RMON MIB (RFC1724) Group 1, 2, 3, 9,

OSPF MIB (RFC1850), SNMP v. 2 MIB (RFC 1907), IF MIB (RFC2233), RFC 2571, RFC 2572, RFC 2573, RFC 2574, RFC 2570, RFC 2674

Flow control: IEEE 802.3x flow control, back pressure flow control

Switch properties

Application level: Layer 2

Total backplane bandwidth: 128Gbps

MAC address table: 8K

Packet buffer: 3Mbits

VLAN data: 1~4094

Protection Level

IP40 

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: DC36-72V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail type, wall-mounted installation

Weight: 5Kg

Size:  440×240×44mm

MTBF

300,000 hours

Warranty

5 years

 



Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News