UnitekFiber Solution.
UnitekFiber Solution.

3m LC/PC to LC/PC Uniboot Duplex OM4 Multimode OFNR 2.0mm/3.0mm Fiber Optic Patch Cable

Uniboot fiber optic patch cable is a cost-effcetive fiber optic patch cord, that lc duplex patch cord provides high-speed 10 Gigabit performance with Laser-Optimized Multimode Fiber .The Uniboot fiber optic patch cable design allows one cable to carry both fibers, reducing cable congestion when routing.This high-quality Uniboot LC duplex fiber optic patch cable is designed for ethernet applications. Uniboot assemblies provide an single boot design integrated into the connector and clip design. Each connection has great durability and is resistant to pulls, strains and impacts during installation. LC Uniboot connector is a re-configurable and push-pull connector especially for high-density fiber optical cable patching in data centers which need space saving and reduce cable management troubles.

Fiber Optic
Description

Description of 3m LC/PC to LC/PC Uniboot Duplex OM4 Multimode OFNR 2.0mm/3.0mm Fiber Optic Patch Cab

Polarity Reverse

For LC uniboot patch cables, the polarity reversal is much easier. Usually, without additional tools, the polarity can easily be changed by several simple steps. In principle there are two practical methods for changing the polarity:


Type one:

By switching the A and B positions in the connector for each fiber.


Type two:

Rotating connector 180 degree to exchange the position.


3m_LC_PC_to_LC_PC_Uniboot_Duplex_OM4_Multimode_OFNR_2.0mm3.0mm_Fiber_Optic_Patch_Cable_(7).jpg


50% Space-saving Uniboot for High Density Applications


The uniboot fiber optic patch cable design improves the effectiveness and flexibility of cable management while saving a lot of space. It is an ideal solution for high-density routing.Cable assemblies with LC duplex uni-boot fiber optic connectors save half of the optical cable infrastructure space over traditional duplex cable products.


3m_LC_PC_to_LC_PC_Uniboot_Duplex_OM4_Multimode_OFNR_2.0mm3.0mm_Fiber_Optic_Patch_Cable_(6).jpg


With tightly tolerant ceramic ferrules to ensure consistent low-loss and ease of termination, these lc uniboot fiber optic connectors are fully intermateable with standard LC licensed products. They are available in single-mode, OM3 or OM4 multimode fiber types to meet a wide variety of configurations and requirements. Optical cable assemblies with LC uniboot fiber optic connectors save half of the cable infrastructure space over traditional lc duplex cable products.


3m_LC_PC_to_LC_PC_Uniboot_Duplex_OM4_Multimode_OFNR_2.0mm3.0mm_Fiber_Optic_Patch_Cable_(5).jpg

Contact UnitekFiber
Contact UnitekFiber
Other Fiber Optic Patch Cord Products
Recent Post