The optical transceiver plays the role of photoelectric conversion, in which the transmitting end converts the electrical signal into an optical signal, which is transmitted through the optical fiber, and the receiving end converts the optical signal into an electrical signal after receiving it. The "G" of 100G refers to the unit of optical signal transmission rate. LR refers to the transmission distance, which generally represents a 10km transmission. Therefore, the 100G QSFP28 optical module is an optical transceiver with a transmission rate of 100G and a transmission distance of 10km.
Low Insertion LossHot-pluggable QSFP28 form factor
Support 103.125Gbps data rate
CAUI-4 electrical interface
I2C DDM interface
Compliant with QSFP28 MSA
3.3V Power Supply
Temperature Range: 0~ 70°C
RoHS compliant
Telecommunication
Data Communication
Storage Area Networks(SAN)
Supports SONET/SDH, Gigabit Ethernet, Fiber Chanel, Optical Supervisory Channel(OSC)
Ethernet switches
Routers
Firewalls and network interface cards and more
PART NUMBER | FORM FACTOR | DATA RATE | WAVELENGTH | LASER | DISTANCE | MEDIUM | CONNECTOR | TEMPERATURE |
UFQP28-100G-SR4 | QSFP28 | 103G | 850nm | VCSEL/PIN | 100m | MMF | MPO | 0℃~70℃ |
UFQP28-100G-LR4 | QSFP28 | 103G | 1310nm | DML/PIN | 10km | SMF | Duplex LC | 0℃~70℃ |
UFQP28-100G-LR4-A | QSFP28 | 112G | 1310nm | EML/PIN | 10km | SMF | Duplex LC | 0℃~70℃ |
UFQP28-100G-LR4-B | QSFP28 | 112G | 1310nm | DML/PIN | 10km | SMF | Duplex LC | 0℃~70℃ |
UFQP28-100G-CWDM4 | QSFP28 | 103G | 1310nm | DML/PIN | 2km | SMF | Duplex LC | 0℃~70℃ |
UFQP28-100G-PSM4 | QSFP28 | 103G | 1310nm | DML/PIN | 500m | SMF | MPO | 0℃~70℃ |
