UnitekFiber Solution
PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China
PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China
PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China

PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China

Description


The 2 optical ports+ 4 electrical ports 100M switch has 2 100M optical ports and 4 x 100M electrical ports. It has the characteristics of adapting to low temperature and high temperature, strong anti-electromagnetic interference, anti-salt spray, anti-vibration and anti-shake. The switch is equipped with redundant dual DC Power supply (9V~56V), which can meet the harsh environmental requirements of industrial sites, and provide efficient, reliable and fast solutions for the industrial Internet of things.






                   

  • PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China
  • PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China
  • PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China
  • PoE DIN Rail 10/100Mbps 2 Optical Ports 4 RJ45 Ports Industrial Ethernet Switch China

Features

  • 2 optical PoE ports, and 4 electrical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Power-on in order of the PoE port, effectively reduce current strike, and reduce the transient voltage surge to PoE switch and other connected devices at the startup (Unique)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this)

Technical Specifications:

Product Name

PoE DIN Rail 10/100Mbps 2 Optical Ports 4×RJ45 Ports Industrial Ethernet Switch China

Product Model

2 optical ports+4 electrical ports industrial unmanaged switch

Product Description

4xRJ45 ports, 2x fiber optic ports

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;IEE802.3x; IEEE802.3af;  IEEE802.3at;

POE Standards

Standard PoE: IEEE802.3af/ IEEE802.3at


PoE port: 1-4 ports support PoE


Output Power:

Maximum power 15.4W (IEEE 802.3af)

Maximum power 30W (IEEE 802.3at)

POE port automatically recognizes af/at


Output voltage: DC48~57V


Power supply mode: 1/2+;3/6-

RJ45 Interface

10/100BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

100BaseFX port (SC/FC/ST optional)

Copper Cable

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-TX: Cat6 or later UTP(≤100 meter)

 

Optic Fiber Cable

MM:850nm  0~550M

SM:1310nm  0~2KM, 1310nm  0~40KM,1550nm  0~120KM

Switch properties

Application level: Layer 2

Total backplane bandwidth: 1.52Gbps

Whole machine packet forwarding rate: 1.130912Mpps

MAC address table: 1K

Packet buffer: 512K

Exchange delay:<3us

Exchange method: store-forward 

Power consumption:<3W

Protection Level

IP40

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: DC12~52V (dual power supply redundant backup)Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail and wall-mounted installation

Weight: 0.85Kg

MTBF

300,000 hours

Warranty

5 years



 


Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News
  • What is MTP/MPO Cabling System for Data Center?
    With the growth of data center high bandwidth demand, high speed becomes the trend of data center cabling system. Do you how to connect fiber optic cable? Using MTP/MPO components for MTP/MPO ca...
  • What is the difference between MPO and MTP?
    With the rapid development of data centers, cloud computing, cloud storage and other applications have gradually spread across various industries, and the bandwidth requirements for network communicat...
  • Application of MTP/MPO Fiber Cables in Data Center
    MTP/MPO fiber cables are widely used in data centers. In recent years, the demand for bandwidth of data center optical fiber transmission systems has shown a trend of high growth. Therefore, the use o...