UnitekFiber Solution
Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale
Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale
Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale

Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale

Description


The 2 optical ports + 6 electrical ports managed switch provides 6 10/100Base-T(X) RJ45 electrical ports and 2 100Base-FX optical ports. The switch adopts a high-strength IP40 protective shell with industrial-grade EMC design, and supports Auto-Negotiation adaptive technology. The product provides LED status indication and supports redundant wide voltage 12~48V DC power input to increase the reliability of the communication network.


  • Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale
  • Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale
  • Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale
  • Managed Industrial Ethernet Switch 2 Optical Ports and 6 RJ45 Ports 100m China Wholesale

Features

  • 2 optical ports, and 6 electrical ports, built-in power

  • IEEE 802.3, IEEE 802.3u, IEEE 802.3af/at PoE compliant

  • Support PoE IP cameras, PoE WIFI AP, and PoE IP phones

  • Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure

  • Up to 30W per port (total power budget: 120W) for powering PoE-enabled devices

  • All ports support wire speed switching, jumbo frame transmission

  • Support upstream ports lightning protection

  • Dynamic power control to ensure stable output power (Enhanced)

  • Improved anti-interference capability, to solve problems in the installation of grounding devices (Enhanced, twice as good as other manufacturers' products)

  • Reliable short-circuit protection to ensure safety (Enhanced)

  • Over-voltage and under-voltage protection (Some other manufacturers' products don't support this


Application:

The industrial ethernet switch is applied in Security system, video multiplexers, IP or CCTV Video Applications, Fiber Optic Solutions and so on.

 

Connection Diagram:

333.png



Specifications:


Product Name

2×100M Optical Ports +6×RJ45 Ports Managed Industrial Ethernet Switch China Wholesal

Product Model

2 Optical Port 6 Electrical RJ45 Ports 10/100M Industrial Etherine Switch

Product Description

6xRJ45 ports, 2x fiber optic ports

Network Protocols

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;

IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;IEE802.3x; IEEE802.3af;  IEEE802.3at;

RJ45 Interface

10/100BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive

Optic Fiber Interface

100BaseFX port (SC/FC/ST optional)

Copper Cable

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-TX: Cat6 or later UTP(≤100 meter)

 

Optic Fiber Cable

MM:850nm  0~550M

SM:1310nm  0~2KM, 1310nm  0~40KM,1550nm  0~120KM

Switch properties

Application level: Layer 2

Total backplane bandwidth: 10Gbps

Whole machine packet forwarding rate: 14.88Mpps

MAC address table: 16K

Packet buffer: 2M

Exchange delay:<4us

Exchange method: store-forward

Protection Level

IP40

LED indicator

Power indicator: PWR

Interface indicator: electrical port, optical port (Link/ACT)

Power Supply

Input voltage: 48~57V (dual power supply redundant backup)

Access terminal: Phoenix terminal

Support dual power supply redundancy

Support built-in overcurrent 4.0A protection

Support reverse connection protection

Working Environment

Working temperature: -40~85℃ ;  Storage temperature: -40~85℃

Relative Humidity: 5%~95 %( no condensation)

Industrial Standard

MI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:

IEC(EN)61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC(EN)61000-4-3(RS): 10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT): Power cable: ±4kV; Data cable: ±2kV

IEC(EN)61000-4-5(Surge): Power cable: ±4kV CM/±2kV DM; Data cable: ±2kV

IEC(EN)61000-4-6 (Radio Frequency Conduction): 3V(10kHz~150kHz), 10V(150kHz~80MHz)

IEC(EN)61000-4-16 (common mode conduction): 30V cont. 300V, 1s

IEC(EN)61000-4-8

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Mechanical properties

Shell: metal material

Installation: DIN rail type, wall-mounted installation

Weight: 0.85Kg

MTBF

300,000 hours

Warranty

5 years





Packaging and Shipping

packaging shipping

Production

production
Leave us Message EMAIL_US
Products
News
  • How do fiber optic cables work
    Optical fiber cable is a communication cable composed of two or more glass, plastic optical fiber cores and cladding layers. how does fiber optic cable work?Generally, lasers are used for internal sig...
  • What is MTP/MPO Cabling System for Data Center?
    With the growth of data center high bandwidth demand, high speed becomes the trend of data center cabling system. Do you how to connect fiber optic cable? Using MTP/MPO components for MTP/MPO ca...
  • What is the difference between MPO and MTP?
    With the rapid development of data centers, cloud computing, cloud storage and other applications have gradually spread across various industries, and the bandwidth requirements for network communicat...